{"title":"APR Performance","description":"Shop all APR Performance products.","products":[{"product_id":"spc-performance-04-15-nissan-armadatitan-front-adjustable-control-arm-41902-t14","title":"SPC Performance 04-15 Nissan Armada\/Titan Front Adjustable Control Arm","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRestore lost caster and camber on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or, use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms feature: A patented adjustable ball joint design to dial in Caster and Camber +\/-3.0deg. Fully forged steel contruction for maximum strength. Upgraded greasable ball joints. SpecRide bushings with free pivot for extended travel while maintaining factory standards for noise, vibration, and harshness (NVH). On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING\u003c\/li\u003e\n  \u003cli\u003eRestore lost caster, camber and droop travel on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms features: A patented adjustable ball joint design to dial in Caster and Camber 3.0, Fully forged steel construction for maximum strength, Arm geometry that clears spring bucket for increased droop travel, Maintenance-free ball joints, SpecRide(TM) bushings with free pivot for extended travel while maintaining factory standards for noise, vibration, and harshness (NVH).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications\u003c\/li\u003e\n  \u003cli\u003ePatented design for extra camber and caster adjustment\u003c\/li\u003e\n  \u003cli\u003eSPC ball joints are oversized and provide 80 of travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 04-15 Nissan Armada\/Titan Front Adjustable Control Arm\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eADJ ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25560 ADJ CAMBER\/CASTER UCA (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTITAN ADJ CONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916582338750,"sku":"T14.41902","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/e740a474b96ffd3a120282a2a2298167_ca461191-0a41-49f3-b81d-aee075fca016.jpg?v=1783214905"},{"product_id":"spc-performance-91-97-toyota-landcruiser-rear-lower-control-arms-pair-4364317-t14","title":"SPC Performance 91-97 Toyota Landcruiser Rear Lower Control Arms (Pair)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. California Residents WARNING\u003c\/li\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 91-97 Toyota Landcruiser Rear Lower Control Arms (Pair)\u003c\/li\u003e\n  \u003cli\u003eCONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eCNTRL ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreasesarticulationwith xAxis sealed flex joint.\u003c\/li\u003e\n  \u003cli\u003e3\/16' wall DOM steel tube construction\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OE arms\u003c\/li\u003e\n  \u003cli\u003e2x stronger than the OEM arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25960 LOWER CONTROL ARMS PAIR\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTOYOTA LOWER CONTROL ARMS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Control Arm\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916583583934,"sku":"T14.4364317","price":367.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/207ab9a1a2d77d594b6d75a774267898_d7647a26-b383-4282-a612-27d49e187775.jpg?v=1783214921"},{"product_id":"spc-performance-toyota-tacoma-upper-control-arm-pair-875107-t14","title":"SPC Performance Toyota Tacoma Upper Control Arm (PAIR)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25440 or #25435 depending on year. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire forward to maximize clearance for 33’s without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster 0.00° to +4.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the 2nd \u0026amp; 3rd Generation Tacoma with forged steel connstruction, sealed modern architecture ball joints, and xAxis™ seald flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e2ND \u0026amp; 3RD GEN TACOMA ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance Toyota Tacoma Upper Control Arm (PAIR)\u003c\/li\u003e\n  \u003cli\u003eAdj. Control Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35470 ADJ. UPPER CONTROL ARMS (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916586926270,"sku":"T14.875107","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/e7e30b4a6a2c160eca62679ddc433bd7L_6cd74574-483c-4bdf-af87-282637b7342c.jpg?v=1783214967"},{"product_id":"spc-performance-04-20-ford-f-150-lowered-front-adjustable-upper-control-arms-887608-t14","title":"SPC Performance 04-20 Ford F-150 Lowered Front Adjustable Upper Control Arms","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #86250 or #86252. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range designed for specifically lowered F-150's. Combined with OE adjusters arm corrects alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire to maximize clearances\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.0° \/ Caster -1.0° to +3.0 °\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eForged steel adjustable front upper control arms for lowered Ford F-150's with, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 04-20 Ford F-150 Lowered Front Adjustable Upper Control Arms\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eLOWERED FORD F-150 ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35675 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916587516094,"sku":"T14.887608","price":849.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/3bbefb4e9139ae356b207f83996198a0L.jpg?v=1783214973"},{"product_id":"spc-performance-08-toyota-landcruiser-rear-lower-control-arms-pair-4364311-t14","title":"SPC Performance 08+ Toyota Landcruiser Rear Lower Control Arms (Pair)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 200 Series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with an xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. Need caster\/camber adjustment or increased articulation on the front? Use our 25465 fully adjustable upper control arms allowing for full travel for your off road needs. California Residents WARNING\u003c\/li\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 200 Series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with an xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. Need caster\/camber adjustment or increased articulation on the front? Use our 25465 fully adjustable upper control arms allowing for full travel for your off road needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 08+ Toyota Landcruiser Rear Lower Control Arms (Pair)\u003c\/li\u003e\n  \u003cli\u003eCONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eCNTRL ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreasesarticulationwith xAxis sealed flex joint.\u003c\/li\u003e\n  \u003cli\u003e3\/16' wall DOM steel tube construction\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OE arms\u003c\/li\u003e\n  \u003cli\u003e2x stronger than the OEM arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25965 LOWER CONTROL ARMS PAIR\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTOYOTA LOWER CONTROL ARMS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Control Arm\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916587778238,"sku":"T14.4364311","price":356.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/9c187ca8eb533684ce08428e3902f9eb_f15e9f58-5cb8-45cb-a691-197138507c6d.jpg?v=1783214976"},{"product_id":"spc-performance-2021-ford-bronco-sport-awd-2022-ford-maverick-awd-adjustable-rear-camber-arm-701547-t14","title":"SPC Performance 2021+ Ford Bronco Sport AWD \/ 2022+ Ford Maverick AWD Adjustable Rear Camber Arm","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eAdd rear camber adjustment to your Ford truck or SUV with this adjustable length control arm from SPC. An adjustment range of 3.0 will get your vehicle back to factory specifications ensuring proper tire wear, improved handling, and excellent ride quality. Each rear arm is equipped with bonded rubber bushings to maintain factory ride.\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 2021+ Ford Bronco Sport AWD \/ 2022+ Ford Maverick AWD Adjustable Rear Camber Arm\u003c\/li\u003e\n  \u003cli\u003eADJ. CAMBER ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOE style rubber bonded bushing maintain ride quality\u003c\/li\u003e\n  \u003cli\u003eLocks camber adjustment with double jam nut design\u003c\/li\u003e\n  \u003cli\u003eAdjusts camber plus or minus 3.0 degrees\u003c\/li\u003e\n  \u003cli\u003eHigh strength steel construction\u003c\/li\u003e\n  \u003cli\u003eRequires one per wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 67445 REAR ADJUSTABLE CAMBER ARM\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eADJUSTABLE CONTROL ARM\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Camber Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eADJ ARM EA\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588236990,"sku":"T14.701547","price":206.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/26327c7fef057af88c04c8759b98c613L_0bfbc671-dd4a-4c43-bba6-f2434afd15a4.jpg?v=1783214985"},{"product_id":"spc-performance-ford-ranger-front-upper-adjustable-arms-pr-894383-t14","title":"SPC Performance Ford Ranger Front Upper Adjustable Arms (PR)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driveability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods.  Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear \u0026amp; possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eChromoly tube and forged steel nose construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster -1.00° to +3.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance Ford Ranger Front Upper Adjustable Arms (PR)\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD RANGER ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35670 ADJ. UPPER CONTROL ARM (PR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588368062,"sku":"T14.894383","price":899.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/3e990a93d932a27974d02dd39810e727L_2574eaaa-a87d-4aea-a120-4530632a8cd3.jpg?v=1783214987"},{"product_id":"spc-performance-2021-up-ford-ranger-adjustable-upper-control-arms-pair-894382-t14","title":"SPC Performance 2021-Up Ford Ranger Adjustable Upper Control Arms - Pair","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driveability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods.  Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear \u0026amp; possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eChromoly tube and forged steel nose construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster -1.00° to +3.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 2021-Up Ford Ranger Adjustable Upper Control Arms - Pair\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD RANGER ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35665 ADJ. UPPER CONTROL ARM (PR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588499134,"sku":"T14.894382","price":899.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/2f95cc28c2070ac7b034c118ab324f06L_4ca2a879-5a32-4d3e-86a8-06593611afda.jpg?v=1783214988"},{"product_id":"spc-performance-2021-ford-bronco-adjustable-upper-control-arms-894384-t14","title":"SPC Performance 2021+ Ford Bronco Adjustable Upper Control Arms","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driveability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods.  Replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear \u0026amp; possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eChromoly tube and billet machined steel nose construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster -1.00° to +3.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford Bronco with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 2021+ Ford Bronco Adjustable Upper Control Arms\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD BRONCO ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35690 ADJ. UPPER CONTROL ARM (PR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588564670,"sku":"T14.894384","price":849.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/eeb3d5b761e63418961b334d67d4f7e9L_eb129f06-689a-4958-bde3-0eb8fabaab53.jpg?v=1783214989"},{"product_id":"spc-performance-96-02-toyota-4runner-95-04-toyota-tacoma-adjustable-upper-control-arms-pair-896531-t14","title":"SPC Performance 96-02 Toyota 4Runner \/ 95-04 Toyota Tacoma Adjustable Upper Control Arms (Pair)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25430. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range combines with OE adjusters to correct alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire forward to maximize clearance for larger tires without frame or fender mods\u003c\/li\u003e\n  \u003cli\u003eBall joint's one piece polymer race with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics.\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster 0.00° to +4.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for Toyota 1st Gen Tacoma and 3rd Gen 4Runner with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 96-02 Toyota 4Runner \/ 95-04 Toyota Tacoma Adjustable Upper Control Arms (Pair)\u003c\/li\u003e\n  \u003cli\u003eAdj. Control Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTOYOTA ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35460 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916589121726,"sku":"T14.896531","price":899.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/bb7c6439abce3b0140c6edbc630c1347L_8a7abf8e-7f1d-478a-9e1f-2bfb2967a337.jpg?v=1783214998"},{"product_id":"spc-performance-21-ford-f-150-front-adj-upper-racing-control-arm-kit-887620-t14","title":"SPC Performance 21+ FORD F-150  Front Adj Upper Racing Control Arm Kit","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #86250 or #86252. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear \u0026amp; allows the tire to move forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.0° \/ Caster 0° to +4.0 °\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford F-150 with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 21+ FORD F-150  Front Adj Upper Racing Control Arm Kit\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e21+ FORD F-150 ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35685 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916593840318,"sku":"T14.887620","price":849.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/571ef4a6ff91d61ae4ae0c4139ab5ec3L.jpg?v=1783215005"},{"product_id":"spc-performance-nissan-light-truck-275170-t14","title":"SPC Performance NISSAN LIGHT TRUCK","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eImprove droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for the Frontier, Pathfinder, and Xterra. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace armsare available in pairs for lifted and off-road applications.   Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of  bushing failure seen on many high travel suspensions.   Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you -1deg to +3deg of caster and +-2deg of camber.   Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.   To make installation easier, SPC now includes a bolt to replace the driver's side rearward bolt, which often needs to be cut out to remove the original arm. If you need more bolts for the other positions order p\/n 21035 replacement bolt kit (2 bolts).   Do you need replacement cams for the lower controlarm? Check out SPC p\/n 87520, which will replace corroded cam bolt assemblies, or can be used on trucks not equipped with factory cam bolts for the lower control arm. These cams should be used with the upper arm kit\u003c\/li\u003e\n  \u003cli\u003eImprove droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring a new maintenance free ball joint and xAxis(TM) bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80 of articulation in the upgraded ball joint and free pivoting bushings, SPC's arm gives you maximum droop travel. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1 of caster built into them. Using its patented ball joint design the arm will get you 0 to +4 of caster and 2 of camber, so you can put your alignment angles back to specification. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p\/n 87520, which will replace corroded cam bolt assemblies, or can be used on trucks not equipped with factory cam bolts for the lower control arm. These cams should be used with the upper arm kit to maximize your set-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications\u003c\/li\u003e\n  \u003cli\u003ePatented design for extra camber and caster adjustment\u003c\/li\u003e\n  \u003cli\u003eSPC ball joints are oversized and provide 80 of travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25540 ADJ CAMBER\/CASTER UCA (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance NISSAN LIGHT TRUCK\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eADJ ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eNISSAN LIGHT TRUCK\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916593905854,"sku":"T14.275170","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/8786d5f8deadb9d065081923db66346f_07311bf1-aca2-4e9b-8c8a-0de1e95521ee.jpg?v=1783215005"},{"product_id":"ford-f-150-raptor-hood-vent-2017-2020","title":"Ford F-150 Raptor Hood Vent 2017-2020","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e***Direct OEM Replacement*** \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eExcessive heat can cause major and expensive  damage to critical components in a car. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. APR Hood Vents help channel out excessive heat that builds up in the engine bay . Built using pre-preg. carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Hood Vents add both function and \"lightness\" where it counts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eCarbon Fiber Construction\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eUV Resistant Coating\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEach Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR Performance","offers":[{"title":"Default Title","offer_id":47917805174974,"sku":"CF-207005","price":1034.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/Raptor-Hood-Vent-Product_HR-7-1.jpg?v=1783224836"},{"product_id":"ford-f-150-raptor-fender-vents-2017-2020","title":"Ford F-150 Raptor Fender Vents 2017-2020","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e***Direct OEM Replacement*** \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eExcessive heat can cause major and expensive  damage to critical components in a car. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. APR Fender Vents help reduce high pressure air that builds up in the wheel wells . Built using pre-preg. carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Fender Vents add both function and \"lightness\" where it counts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eCarbon Fiber Construction\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan class=\"bold\" data-mce-fragment=\"1\"\u003eUV Resistant Coating\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEach Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR Performance","offers":[{"title":"Default Title","offer_id":47917805306046,"sku":"CF-207002","price":677.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/Raptor-Fender-Vent-Product_HR-1-1.jpg?v=1783224840"}],"url":"https:\/\/sbxoffroad.com\/collections\/apr-performance.oembed","provider":"SBX Off-Road","version":"1.0","type":"link"}