{"title":"Suspension \u0026 Lift Kits","description":"\u003cp\u003eLift kits, leveling kits, coilovers, shocks, control arms and suspension upgrades for trucks, Jeeps and off-road rigs.\u003c\/p\u003e","products":[{"product_id":"spc-performance-04-15-nissan-armadatitan-front-adjustable-control-arm-41902-t14","title":"SPC Performance 04-15 Nissan Armada\/Titan Front Adjustable Control Arm","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRestore lost caster and camber on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or, use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms feature: A patented adjustable ball joint design to dial in Caster and Camber +\/-3.0deg. Fully forged steel contruction for maximum strength. Upgraded greasable ball joints. SpecRide bushings with free pivot for extended travel while maintaining factory standards for noise, vibration, and harshness (NVH). On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING\u003c\/li\u003e\n  \u003cli\u003eRestore lost caster, camber and droop travel on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms features: A patented adjustable ball joint design to dial in Caster and Camber 3.0, Fully forged steel construction for maximum strength, Arm geometry that clears spring bucket for increased droop travel, Maintenance-free ball joints, SpecRide(TM) bushings with free pivot for extended travel while maintaining factory standards for noise, vibration, and harshness (NVH).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications\u003c\/li\u003e\n  \u003cli\u003ePatented design for extra camber and caster adjustment\u003c\/li\u003e\n  \u003cli\u003eSPC ball joints are oversized and provide 80 of travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 04-15 Nissan Armada\/Titan Front Adjustable Control Arm\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eADJ ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25560 ADJ CAMBER\/CASTER UCA (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTITAN ADJ CONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916582338750,"sku":"T14.41902","price":799.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/e740a474b96ffd3a120282a2a2298167_ca461191-0a41-49f3-b81d-aee075fca016.jpg?v=1783214905"},{"product_id":"fabtech-15-18-ford-f150-2wd-6in-basic-system-component-box-1-223598-t14","title":"Fabtech 15-18 Ford F150 2WD 6in Basic System - Component Box 1","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FTS22254\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eComponent box for a specific part number. Contains necessary parts for your lift kit needs.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eComponent Box; Box 1 of 2; For 6 in. Lift; For PN[K2247\/K2247M];\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 15-18 Ford F150 2WD 6in Basic System - Component Box 1\u003c\/li\u003e\n  \u003cli\u003eLiftKtSuspComponent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cp\u003eGuarantee Superior Performance And Functionality\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eNO WHEELS\/TIRES; 0. NO FOOTNOTES\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCOMPONENT BOX 1\u003c\/li\u003e\n  \u003cli\u003eComponent Box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916582797502,"sku":"T14.223598","price":1084.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/4d4fa853ac796943bb9970a865a4185b_dc64ddc1-7d5d-4a31-99b2-ff17c1f20f4a.jpg?v=1783214910"},{"product_id":"fabtech-15-18-ford-f150-2wd-6in-performance-system-component-box-1-223599-t14","title":"Fabtech 15-18 Ford F150 2WD 6in Performance System - Component Box 1","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FTS22255\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eComponent box for a specific part number. Contains necessary parts for your lift kit needs.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 15-18 Ford F150 2WD 6in Performance System - Component Box 1\u003c\/li\u003e\n  \u003cli\u003eLiftKtSuspComponent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eComponent Box; Box 1 of 2; For 6 in. Lift; For PN[K2248DL\/K2249DL];\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cp\u003eGuarantee Superior Performance And Functionality\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eNO WHEELS\/TIRES; 0. NO FOOTNOTES\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCOMPONENT PERF BOX 1\u003c\/li\u003e\n  \u003cli\u003eComponent Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916582830270,"sku":"T14.223599","price":894.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/4d4fa853ac796943bb9970a865a4185b_e73e3e3a-e829-491b-8ca4-06cd0b672c57.jpg?v=1783214911"},{"product_id":"fabtech-15-18-ford-f150-2wd-6in-front-dirt-logic-25-nr-coilovers-pair-223607-t14","title":"Fabtech 15-18 Ford F150 2WD 6in Front Dirt Logic 2.5 N\/R Coilovers - Pair","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FTS22265\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDirt Logic 2.5 Coilovers. From our desert racing experience the Dirt Logic 2.5 has been developed for exceptional performance in a variety of Coilover applications. The Dirt Logic 2.5 will provide incredible dampening capacity for aggressive offroad driving. Features: 2.5in OD Stainless Steel Body. 2.25in OD Billet Aluminum Piston. 7\/8in NitroSteel Black Piston Rod. Cold Wound Coil Springs. Adjustable Coilover Construction. 5\/8in Spherical Ball Mounting Ends. Extended Length - E28.13. Collasped Length - C22.27. Stroke Length - S5.86 . Top Mount - TP. Bottom Mount - BPF1.\u003c\/li\u003e\n  \u003cli\u003eDerived from our desert racing circuit the Dirt Logic 2.5 is an exceptional performance shock that has been developed for a variety of coilover applications. The Dirt Logic 2.5 will provide incredible dampening capacity for aggressive offroad driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eDirt Logic 2.5 Resi Coil Over Shock Absorber; Front; For 6 in. Lift; For PN[K2249DL];\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 15-18 Ford F150 2WD 6in Front Dirt Logic 2.5 N\/R Coilovers - Pair\u003c\/li\u003e\n  \u003cli\u003e2.5DLSS C\/O N\/R 15 F\u003c\/li\u003e\n  \u003cli\u003eCoilOvr\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2.5DLSS C\/O N\/R 15 F150 2WD 6\" PAIR PACKAGED\u003c\/li\u003e\n  \u003cli\u003eDirt Logic 2.5 Resi Coil Over Shock Absorber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cp\u003eBolt-On Without Further Adjustments\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eNO WHEELS\/TIRES; 0. NO FOOTNOTES\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003ePAIR PACKAGED\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916582928574,"sku":"T14.223607","price":1626.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/2ccc9419dc5d268ecbfadb0439b1610c_06105a87-63d4-435e-8071-8111869597c3.jpg?v=1783214912"},{"product_id":"fabtech-15-18-ford-f150-2wd-6in-front-dirt-logic-25-reservoir-coilovers-pair-223608-t14","title":"Fabtech 15-18 Ford F150 2WD 6in Front Dirt Logic 2.5 Reservoir Coilovers - Pair","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FTS22266\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDirt Logic 2.5 Resi Coilovers. From our desert racing experience the Dirt Logic 2.5 has been developed for exceptional performance in a variety of Coilover applications. The Dirt Logic 2.5 will provide incredible dampening capacity for aggressive offroad driving. Features: 2.5in OD Stainless Steel Body. 2.25in OD Billet Aluminum Piston. 7\/8in NitroSteel Black Piston Rod. Cold Wound Coil Springs. Adjustable Coilover Construction. 5\/8in Spherical Ball Mounting Ends. 2.50in OD Aluminum Reservoir w\/-8 Stainless Steel O-ring Hose. Extended Length - E28.13. Collasped Length - C22.27. Stroke Length - S5.86 . Top Mount - TP. Bottom Mount - BPF1.\u003c\/li\u003e\n  \u003cli\u003eDerived from our desert racing circuit the Dirt Logic 2.5 is an exceptional performance shock that has been developed for a variety of coilover applications. The Dirt Logic 2.5 will provide incredible dampening capacity for aggressive offroad driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eDirt Logic 2.5 Resi Coil Over Shock Absorber; Front; For 6 in. Lift; For PN[K2248DL];\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 15-18 Ford F150 2WD 6in Front Dirt Logic 2.5 Reservoir Coilovers - Pair\u003c\/li\u003e\n  \u003cli\u003e2.5DLSS C\/O RESI 15F\u003c\/li\u003e\n  \u003cli\u003eCoilOvr\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2.5DLSS C\/O RESI 15F150 2WD 6\" PAIR PACKAGED\u003c\/li\u003e\n  \u003cli\u003eDirt Logic 2.5 Resi Coil Over Shock Absorber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cp\u003eBolt-On Without Further Adjustments\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eNO WHEELS\/TIRES; 0. NO FOOTNOTES\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003ePAIR PACKAGED\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583026878,"sku":"T14.223608","price":2072.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/163adc75768e6d2e1bda8e61b9c46da2_5a7d13cc-5671-40ed-ac5f-537db904ad2f.jpg?v=1783214912"},{"product_id":"fabtech-ram-25003500-front-sway-bar-end-link-bushing-kit-224400-t14","title":"Fabtech Ram 2500\/3500 Front Sway Bar End Link Bushing Kit","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FTS98029\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech Ram 2500\/3500 Front Sway Bar End Link Bushing Kit\u003c\/li\u003e\n  \u003cli\u003eFRT END LINK KIT RAM\u003c\/li\u003e\n  \u003cli\u003eSway Bar Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Control Arm Bushing Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eSway Bar Kit; Front End Link Kit;\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eNO WHEELS\/TIRES; 0. NO FOOTNOTES\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFRT END LINK KIT RAM 2500\/3500\u003c\/li\u003e\n  \u003cli\u003eSway Bar Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFront End Link Kit\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cp\u003eLong Arm Front\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583059646,"sku":"T14.224400","price":202.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/4d4fa853ac796943bb9970a865a4185b_7f717100-756f-499d-a6ae-657c48ec366d.jpg?v=1783214913"},{"product_id":"fabtech-sway-bar-drop-brackets-driver-325455-t14","title":"Fabtech Sway Bar Drop Brackets (Driver)","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FT30630\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cp\u003eFabtech Sway Bar Drop Brackets (Driver)\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583125182,"sku":"T14.325455","price":31.22,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/dcb5f9d098a0e99ed8ac97031c1ca459L.jpg?v=1783214914"},{"product_id":"fabtech-sway-bar-drop-brackets-passenger-325454-t14","title":"Fabtech Sway Bar Drop Brackets (Passenger)","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : FT30629\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cp\u003eFabtech Sway Bar Drop Brackets (Passenger)\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583289022,"sku":"T14.325454","price":31.22,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/dcb5f9d098a0e99ed8ac97031c1ca459L_4ef5fdd7-798c-4632-9d6f-9bb0b0c9b703.jpg?v=1783214917"},{"product_id":"fabtech-07-18-gm-k1500-4in-uniball-uca-system-wrear-perf-shocks-588124g-t14","title":"Fabtech 07-18 GM K1500 4in Uniball UCA System w\/Rear Perf. Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1062\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eThis system offers a mild lift height with easy installation for clearance of 33 tall tires on 2014 C\/K1500s w\/ factory Steel suspension.  Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range.  The arms are constructed of top quality material including .120 wall 4130 Chromoly tubing with a 1.50 OD and 1 FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions.  The front differential is relocated to keep CV angles proper with the new lift height while a 1\/4 thick steel skid plate provides protection against offroad obstacles.  Rear lift is accomplished with 1 1\/2 rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eUniball Control Arm Lift System; w\/Rear Performance Shock; 4 in. Lift; Incl. Uniball Upper Control Arms; Differential Drop Brackets; Differential Skid Plate; Block\/U-Bolts;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 07-18 GM K1500 4in Uniball UCA System w\/Rear Perf. Shocks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSimplified Design With Fast Install\u003c\/li\u003e\n  \u003cli\u003eSteering Knuckles Retain Proper ESC\u003c\/li\u003e\n  \u003cli\u003eNo Loss Of Ground Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eUniball Control Arm Lift System\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583518398,"sku":"T14.588124G","price":1142.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/028400504ef46e28f143a40d08da7961_85346499-51bc-4852-b036-2fc16b293a29.jpg?v=1783214920"},{"product_id":"spc-performance-91-97-toyota-landcruiser-rear-lower-control-arms-pair-4364317-t14","title":"SPC Performance 91-97 Toyota Landcruiser Rear Lower Control Arms (Pair)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. California Residents WARNING\u003c\/li\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 91-97 Toyota Landcruiser Rear Lower Control Arms (Pair)\u003c\/li\u003e\n  \u003cli\u003eCONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eCNTRL ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreasesarticulationwith xAxis sealed flex joint.\u003c\/li\u003e\n  \u003cli\u003e3\/16' wall DOM steel tube construction\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OE arms\u003c\/li\u003e\n  \u003cli\u003e2x stronger than the OEM arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25960 LOWER CONTROL ARMS PAIR\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTOYOTA LOWER CONTROL ARMS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Control Arm\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916583583934,"sku":"T14.4364317","price":367.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/207ab9a1a2d77d594b6d75a774267898_d7647a26-b383-4282-a612-27d49e187775.jpg?v=1783214921"},{"product_id":"fabtech-14-18-gm-k1500-woe-alum-uca-4in-budget-uca-system-wdl-25-coilovers-rear-dl-shocks-588138g-t14","title":"Fabtech 14-18 GM K1500 w\/OE Alum. UCA 4in Budget UCA System w\/DL 2.5 Coilovers \u0026 Rear DL Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1070DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eBudget Lift System w\/Shock; w\/DLSS Shocks; 4 in. Lift; Incl. Upper Control Arms\/Ball Joint; Diff. Mounts; Skid Plate; Blocks\/U-Bolts; Rear Shocks; All Req. Hardware;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 14-18 GM K1500 w\/OE Alum. UCA 4in Budget UCA System w\/DL 2.5 Coilovers \u0026amp; Rear DL Shocks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cp\u003eRetains Factory Front Coil Springs For Stock Ride\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K1070DL 3\" BALLJOINT GMC 1500\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eBudget Lift System w\/Shock\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583649470,"sku":"T14.588138G","price":2987.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/d9f5c1ffd6afeca7957f11d83729792f_01cce534-3571-4099-9a78-732346584b5b.jpg?v=1783214922"},{"product_id":"fabtech-14-18-gm-k1500-woe-alum-uca-4in-uniball-uca-system-wdl-25-coilovers-rear-dl-shocks-588141g-t14","title":"Fabtech 14-18 GM K1500 w\/OE Alum. UCA 4in Uniball UCA System w\/DL 2.5 Coilovers \u0026 Rear DL Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1071DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eThis new 4 System capitalizes on Toyota Tundras large wheelwell opening to allow use of 35 tall tires with minimum lift height. The design of this 4 System is a new style of suspension that delivers improved performance with fewer parts, and comes with an affordable price.  The system includes replacement upper control with a .120 wall DOM arm with heavy duty extended range ball joints that provide additional strength to the front suspension.  Heavy duty extended length steering knuckles are included to provide proper functionality of the factory ESC (Electronic Stability Control) with 35 tall tires. The knuckles retain the stock track width keeping the tires under the front fenders.  The front differential is relocated to keep CV angles proper during the full range of travel. Front bump stop extensions and brake hose relocation brackets complete the front suspension. Rear lift comes from a 1 lift block and u-bolt system to level the stance of the vehicle.  The 4 System is available with a spacer system to retain the factory Coilover shocks and rear Performance shocks.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eUniball Control Arm Lift System; w\/DLSS Shocks; 4 in. Lift; Incl. UCA w\/Ball Joint; Diff. Mounts; Skid Plate; Blocks\/U-Bolts; Rear Shocks; All Req. Hardware;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 14-18 GM K1500 w\/OE Alum. UCA 4in Uniball UCA System w\/DL 2.5 Coilovers \u0026amp; Rear DL Shocks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSimplified Design With Fast Install\u003c\/li\u003e\n  \u003cli\u003eSteering Knuckles Retain Proper ESC\u003c\/li\u003e\n  \u003cli\u003eNo Loss Of Ground Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eUniball Control Arm Lift System\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916583911614,"sku":"T14.588141G","price":3233.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/f5fefe4b41565863b470bce7bae46b65_4bcd0089-3802-4269-a997-68a7045e3f6b.jpg?v=1783214926"},{"product_id":"fabtech-07-18-gm-k1500-woe-forged-uca-35in-uca-system-wdl-25-coilovers-rear-dl-shocks-588126g-t14","title":"Fabtech 07-18 GM K1500 w\/OE Forged UCA 3.5in UCA System w\/DL 2.5 Coilovers \u0026 Rear DL Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1063DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis new 4 System capitalizes on Toyota Tundras large wheelwell opening to allow use of 35 tall tires with minimum lift height. The design of this 4 System is a new style of suspension that delivers improved performance with fewer parts, and comes with an affordable price.  The system includes replacement upper control with a .120 wall DOM arm with heavy duty extended range ball joints that provide additional strength to the front suspension.  Heavy duty extended length steering knuckles are included to provide proper functionality of the factory ESC (Electronic Stability Control) with 35 tall tires. The knuckles retain the stock track width keeping the tires under the front fenders.  The front differential is relocated to keep CV angles proper during the full range of travel. Front bump stop extensions and brake hose relocation brackets complete the front suspension. Rear lift comes from a 1 lift block and u-bolt system to level the stance of the vehicle.  The 4 System is available with a spacer system to retain the factory Coilover shocks and rear Performance shocks.\u003c\/li\u003e\n  \u003cli\u003eLift is accomplished with Dirt Logic 2.5 Coilovers that provide superior damping for aggressive offroad use and a good highway ride. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range.\u003c\/li\u003e\n  \u003cli\u003eThe arms are constructed of top quality material including .120” wall 4130 Chromoly tubing with a 1.50” OD and 1” FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions.\u003c\/li\u003e\n  \u003cli\u003eRear lift is accomplished with 1 1\/2\" rear lift block and u-bolts to help level the stance of the vehicles. Dirt Logic 2.25 rear shock absorbers replace the stock units for increased damping for both on and offroad use.\u003c\/li\u003e\n  \u003cli\u003eThe front differential is relocated to keep CV angles proper with the new lift height while a 1\/4” thick steel skid plate provides protection against offroad obstacles.\u003c\/li\u003e\n  \u003cli\u003eThis system offers a mild lift height with easy installation for clearance of 33” tall tires on GM C\/K1500s.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniball Control Arm Lift System; w\/DLSS Shocks; 3 in. Lift; Incl. Uniball Upper Control Arms; Differential Drop Brackets; Differential Skid Plate; Block\/U-Bolts;\u003c\/li\u003e\n  \u003cli\u003eUniball Control Arm Lift System; w\/DLSS Shocks; 4 in. Lift; Incl. Uniball Upper Control Arms; Differential Drop Brackets; Differential Skid Plate; Block\/U-Bolts;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 07-18 GM K1500 w\/OE Forged UCA 3.5in UCA System w\/DL 2.5 Coilovers \u0026amp; Rear DL Shocks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K1063DL 3\" UNIBALL CHEVY 1500\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSimplified Design With Fast Install\u003c\/li\u003e\n  \u003cli\u003eSteering Knuckles Retain Proper ESC\u003c\/li\u003e\n  \u003cli\u003eNo Loss Of Ground Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eUniball Control Arm Lift System\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916584140990,"sku":"T14.588126G","price":3233.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/f5fefe4b41565863b470bce7bae46b65_16817b29-79b8-4cfa-9335-b3c0e8b83ce7.jpg?v=1783214929"},{"product_id":"fabtech-11-19-gm-ck2500hd3500hd-4in-ultimate-system-wuniball-uca-perf-shocks-588127g-t14","title":"Fabtech 11-19 GM C\/K2500HD\/3500HD 4in Ultimate System w\/Uniball UCA \u0026 Perf. Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1064\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eObtain increased wheel travel with a mild lift height with these heavy duty Upper Control Arm systems. The tubular Upper Control Arms feature 1.25 OD, .120 wall thick chromoly tube construction with 1 diameter Stainless Steel Uniballs that attach to the factory spindle without drilling. The replacement UCAs have been designed to work in conjunction with Fabtechs Dirt Logic 2.5 Coilover shocks providing 10 of wheel travel for a complete front suspension system upgrade. The vehicles offroad suspension performance will be greatly increased due to the extensive ride tuning of the Dirt Logic 2.5 Coilovers and rear Dirt Logic 2.25s.\u003c\/li\u003e\n  \u003cli\u003eThe 3.5” System is available with our Uniball Upper Control Arms that feature .120” wall 4130 Chromoly tubing with a 1.50” OD 1” FK Stainless PTFE Uniballs for 9” of front wheel travel. The system also includes heavy duty ductile iron steering knuckles and forged adjusting torsion bar keys to provide the proper amount of lift without CV bind.\u003c\/li\u003e\n  \u003cli\u003eThis system will level the stance of the vehicle compared to the factory nose down rake with no change to the rear suspension. For those customers that require a factory nose down appearance an optional 1? rear block kit is available (2500HD Part # FTS21110) or (3500HD Part # FTS21111).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe 3.5” System is available with our Uniball Upper Control Arms that feature .120” wall 4130 Chromoly tubing with a 1.50” OD 1” FK Stainless PTFE Uniballs for 9” of front wheel travel.\u003c\/li\u003e\n  \u003cli\u003eUniball Control Arm Lift System; w\/Performance Shocks; 4 in. Lift; Incl. Uniball Control Arm;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-19 GM C\/K2500HD\/3500HD 4in Ultimate System w\/Uniball UCA \u0026amp; Perf. Shocks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2011-19 Chevy 2\/3500HD 3.5\" UCA Ball Joint System w\/ Performance Shocks\u003c\/li\u003e\n  \u003cli\u003eUniball Control Arm Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUpper Control Arms Built With Same Materials Found On Trophy Trucks\u003c\/li\u003e\n  \u003cli\u003eHeat Treated 17-4 Stainless Steel Tapered Uniball Pins\u003c\/li\u003e\n  \u003cli\u003eRegulates Wheel Motion In Relation To Body\u003c\/li\u003e\n  \u003cli\u003e.120\" Wall 4130 Chromoly Tubing. 1.50\" OD\u003c\/li\u003e\n  \u003cli\u003eCustom Engineered For High Quality Ride\u003c\/li\u003e\n  \u003cli\u003e1\" ID Stainless Steel American Uniball\u003c\/li\u003e\n  \u003cli\u003e.250\" wall DOM Bushing Barrels\u003c\/li\u003e\n  \u003cli\u003eDuctile Iron Steering Knuckles\u003c\/li\u003e\n  \u003cli\u003e17-4 Stainless Misalignments\u003c\/li\u003e\n  \u003cli\u003eForged Torsion Bar Keys\u003c\/li\u003e\n  \u003cli\u003eUpper Control Arm Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K1064 3.5\" UCA CHEVY 2\/3500HD\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916584239294,"sku":"T14.588127G","price":1697.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/678f3c8c74238547fec7360c61ee3c69_6ba2bf5a-effa-492f-8271-b8038faec05e.jpg?v=1783214930"},{"product_id":"fabtech-07-18-gm-k1500-woe-forged-uca-35in-uca-system-wdl-25-resi-coilovers-rear-dl-shocks-588171g-t14","title":"Fabtech 07-18 GM K1500 w\/OE Forged UCA 3.5in UCA System w\/DL 2.5 Resi Coilovers \u0026 Rear DL Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1108DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAs an upgrade to our popular 4'' Budget System we offer the system with our Uniball Upper Control Arms. The Uniball Upper Control Arms feature .120'' wall 4130 Chromoly tubing with a 1.50'' OD and 1'' FK Stainless PTFE Uniballs for unsurpassed strength. The system also includes front differential drop brackets, a 1\/4'' thick steel skid diff plate along with 1 1\/2'' rear lift block and u-bolts. The 4'' System is available with our high end Dirt Logic 2.5 Coilovers for 10'' of front Wheel travel and Dirt Logic 2.25 rear shocks for aggressive offroad driving. Uniball Upper Control Arms are available separately as an upgrade to stock, previously installed Fabtech'suspensions or other aftermarket suspension systems.\u003c\/li\u003e\n  \u003cli\u003eArms eliminate upper ball join w\/super strong 1 ID stainless American uniball. Additional caster is built into arms for greater align ability to help with problematic leveling kit alignments. Allows for increased wheel travel when used w\/Dirt Logic 2.5 coilover shocks. Chromoly tubing reduces flex found in stock arms for more positive road feel. 4340 heat treated uniball pin fits into factory ball join taper without modification to the spindle for easy return to stock feature. Arms are direct replacements for factory arms on suspensions that require additional strength and align ability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 33\/12.50R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 275\/65R18 Wheel - 18X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 295\/55R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniball Control Arm Lift System; 4 in. Lift; Uniball Upper Control Arm; Front Dirt Logic SS 2.5 Coilover Resi; Rear Dirt Logic SS Shocks;\u003c\/li\u003e\n  \u003cli\u003e3\" UNIBALL UCA SYS W\/ DL 2.5 2.25 07-18 GM C\/K1500 W\/ OE FORG STL UCA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 07-18 GM K1500 w\/OE Forged UCA 3.5in UCA System w\/DL 2.5 Resi Coilovers \u0026amp; Rear DL Shocks\u003c\/li\u003e\n  \u003cli\u003e3\" UNIBALL UCA SYS W\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e3\" UNIBALL UCA SYS W\/ DL 2.5 2.25 07-18 GM C\/K1500 W\/ OE FORG STL UCA\u003c\/li\u003e\n  \u003cli\u003eUniball Control Arm Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRegulates Wheel Motion In Relation To Body\u003c\/li\u003e\n  \u003cli\u003eCustom Engineered For High Quality Ride\u003c\/li\u003e\n  \u003cli\u003eUpper Control Arm Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-3\" UNIBALL UCA SYS W\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916584435902,"sku":"T14.588171G","price":3655.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/638d01ad4ebdbf8305e52882f88fed33_303dd3bb-bec7-4404-8e83-c1afdb57aa83.jpg?v=1783214932"},{"product_id":"fabtech-14-18-gm-k1500-woe-alum-uca-4in-budget-uca-system-wdl-25-resi-coilovers-rear-dl-shocks-588172g-t14","title":"Fabtech 14-18 GM K1500 w\/OE Alum. UCA 4in Budget UCA System w\/DL 2.5 Resi Coilovers \u0026 Rear DL Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1109DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis system offers a mild lift height with easy installation for clearance of 33'' tall tires on 2014-15 K1500's w\/ factory Aluminum suspension. Lift is accomplished with Dirt Logic 2.5 Coilovers that provide superior damping for aggressive offroad use and a good highway ride. The stock upper control arms are replaced with thick wall DOM tubular arms that feature heavy duty extended range ball joints. These ball joints provide additional strength to the vehicles suspension compared to the factory. The front differential is relocated to keep CV angles proper with the new lift height while a 1\/4'' thick steel skid plate provides protection against offroad obstacles. Rear lift is accomplished with 1 1\/2'' rear lift block and u-bolts to help level the stance of the vehicles. Dirt Logic 2.25 rear shock absorbers replace the stock units for increased damping for both on and offroad use. - Value priced system with Fabtech quality - Increased ground clearance - Includes Dirt Logic 2.5 Coilovers for superior damping - Extended range upper ball joints provide a smooth quiet ride - Increased fender clearance compared to a Leveling Kit for 33'' tall tires - Suspension can be restored to stock -Easy installation. NOTE- Before ordering visually check your vehicle's factory suspension for aluminum or steel version. This system will only fit factory aluminum suspension vehicles.\u003c\/li\u003e\n  \u003cli\u003eThe 4 Budget System utilizes the factory front coil springs with a steel upper spacer providing 4 of lift. Radius Arm drop brackets retain the factory arms with correct caster setting for the increase ride height. System includes a Trac Bar relocation bracket that has been designed to center the axle under the vehicle and still works properly with the factory Pitman Arm. This eliminates the need to replace the Pitman Arm resulting in a lower cost and faster installation time. Rear lift is accomplished with lift blocks and extended length u-bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 33\/12.50R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 275\/65R18 Wheel - 18X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 295\/55R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBudget Lift System; 4 in. Lift; w\/Ball Joint Upper Control Arm; Front Dirt Logic SS 2.5 Coilover Resi; Rear Dirt Logic Shocks;\u003c\/li\u003e\n  \u003cli\u003e3\" BUDGET SYS W\/ DL 2.5 \u0026amp; 2. 14-18 GM C\/K1500 P\/U W\/ OE ALM OR STMP STL UCA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 14-18 GM K1500 w\/OE Alum. UCA 4in Budget UCA System w\/DL 2.5 Resi Coilovers \u0026amp; Rear DL Shocks\u003c\/li\u003e\n  \u003cli\u003e3\" BUDGET SYS W\/ DL\u003c\/li\u003e\n  \u003cli\u003eLift Kit-Suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e3\" BUDGET SYS W\/ DL 2.5 \u0026amp; 2. 14-18 GM C\/K1500 P\/U W\/ OE ALM OR STMP STL UCA\u003c\/li\u003e\n  \u003cli\u003eBudget Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eESC And Traction Control Compliant\u003c\/li\u003e\n  \u003cli\u003eAllows Clearance For 35 in. Tires\u003c\/li\u003e\n  \u003cli\u003eNo Welding Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-3\" BUDGET SYS W\/ DL\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916584501438,"sku":"T14.588172G","price":3404.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/8cf2dd7dfe00dbbf88eee7f204618ea5_603ea6c8-4acc-4d37-8a9b-bec470b7f6f3.jpg?v=1783214933"},{"product_id":"fabtech-07-15-toyota-tundra-2wd4wd-4in-budget-uca-system-wrear-perf-shocks-588924g-t14","title":"Fabtech 07-15 Toyota Tundra 2WD\/4WD 4in Budget UCA System w\/Rear Perf. Shocks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K7028\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eThis new 4 System capitalizes on Toyota Tundras large wheelwell opening to allow use of 35 tall tires with minimum lift height. The design of this 4 System is a new style of suspension that delivers improved performance with fewer parts, and comes with an affordable price.  The system includes replacement upper control with a .120 wall DOM arm with heavy duty extended range ball joints that provide additional strength to the front suspension.  Heavy duty extended length steering knuckles are included to provide proper functionality of the factory ESC (Electronic Stability Control) with 35 tall tires. The knuckles retain the stock track width keeping the tires under the front fenders.  The front differential is relocated to keep CV angles proper during the full range of travel. Front bump stop extensions and brake hose relocation brackets complete the front suspension. Rear lift comes from a 1 lift block and u-bolt system to level the stance of the vehicle.  The 4 System is available with a spacer system to retain the factory Coilover shocks and rear Performance shocks.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eBall Joint Control Arm Lift System; w\/Performance Shocks; 4 in. Lift; Incl. Rr Shocks; Spindles; Spacers; 1 in. Blocks; U-Bolts; Hardware; Ball Joint UCA;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 07-15 Toyota Tundra 2WD\/4WD 4in Budget UCA System w\/Rear Perf. Shocks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSimplified Design With Fast Install\u003c\/li\u003e\n  \u003cli\u003eSteering Knuckles Retain Proper ESC\u003c\/li\u003e\n  \u003cli\u003eNo Loss Of Ground Clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eBall Joint Control Arm Lift System\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K7028 4\" TUNDRA SYSTEM\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916585648318,"sku":"T14.588924G","price":1380.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/302894de4aa272629745d4fec105e8c6_b4b43f25-4f60-46d4-9ce1-1c7052494026.jpg?v=1783214951"},{"product_id":"fabtech-05-07-ford-f350-4wd-6in-4link-sys-wdlss-40-co-rr-dlss-588248g-t14","title":"Fabtech 05-07 Ford F350 4WD 6in 4Link Sys w\/Dlss 4.0 C\/O \u0026 Rr Dlss","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K20142DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAt the top of our Super Duty line is our famous 4 Link System that provides unsurpassed articulation and Wheel travel. Large 2'' OD heavy wall links feature race style 1'' Uniballs for superior strength. Thick 1\/4'' steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system comes with our Dirt Logic 4.0 Stainless Steel Coilover Shock conversion. Also included are Billet Sway bar links, Trac Bar relocation bracket, Pitman Arm and more. Rear lift includes a block \u0026amp; u-bolt kit. Includes rear 2.25 Dirt Logic Stainless Steel shocks.\u003c\/li\u003e\n  \u003cli\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.; WILL NOT WORK ON MODELS WITH DIGITAL CLIMATE CONTROL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 05-07 Ford F350 4WD 6in 4Link Sys w\/Dlss 4.0 C\/O \u0026amp; Rr Dlss\u003c\/li\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/DLSS\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/DLSS 4.0 C\/O \u0026amp; RR DLSS 05-07 FORD F350 4WD.\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System; w\/DLSS Shocks; 6 in. Lift;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/DLSS 4.0 C\/O \u0026amp; RR DLSS 05-07 FORD F350 4WD\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" 4LINK SYS W\/DLSS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916585746622,"sku":"T14.588248G","price":7053.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/650f91014573336c5053b28af2ad9f4d_8d4f3d80-00a0-46eb-b929-2ed4c33d33cd.jpg?v=1783214952"},{"product_id":"fabtech-08-10-ford-f350-4wd-6in-4link-sys-wdlss-40-co-rr-dlss-588284g-t14","title":"Fabtech 08-10 Ford F350 4WD 6in 4Link Sys w\/Dlss 4.0 C\/O \u0026 Rr Dlss","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K20321DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and Wheel travel. These 2'' diameter heavy wall links feature race style 1'' Uniballs for superior strength. Thick 1\/4'' steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system includes our Dirt Logic 4.0 Stainless Steel adjustable Coilover Shock conversion. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and a rear Block \u0026amp; U-Bolt kit. Includes rear 2.25 Dirt Logic Stainless Steel shocks.\u003c\/li\u003e\n  \u003cli\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 35\/12.50R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING; TIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 08-10 Ford F350 4WD 6in 4Link Sys w\/Dlss 4.0 C\/O \u0026amp; Rr Dlss\u003c\/li\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/DLSS\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/DLSS 4.0 C\/O \u0026amp; RR DLSS 08-10 FORD F350 4WD.\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System; w\/DLSS Shocks; 6 in. Lift;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/DLSS 4.0 C\/O \u0026amp; RR DLSS 08-10 FORD F350 4WD\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" 4LINK SYS W\/DLSS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916585877694,"sku":"T14.588284G","price":6964.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/7112e4619164c0f77b8db23df9bc52da_e76f27ae-eb1e-4d00-b1e9-98775172c0f4.jpg?v=1783214954"},{"product_id":"fabtech-05-07-ford-f250-4wd-wfactory-overload-6in-rad-arm-sys-wcoils-stealth-588229g-t14","title":"Fabtech 05-07 Ford F250 4WD w\/Factory Overload 6in Rad Arm Sys w\/Coils \u0026 Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K20111M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6'' replacement Coil Springs or the Dirt Logic 4.0 Coilover Shock conversion. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops and more. Rear lift includes a block \u0026amp; u-bolt kit.\u003c\/li\u003e\n  \u003cli\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block \u0026amp; U-bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRadius Arm Lift System; w\/Stealth Monotube Shocks; 6 in. Lift; w\/Factory Overload;\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; STEALTH 05-07 FORD F250 4WD W\/FACTORY OVERLOAD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 05-07 Ford F250 4WD w\/Factory Overload 6in Rad Arm Sys w\/Coils \u0026amp; Stealth\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COI\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; STEALTH 05-07 FORD F250 4WD W\/FACTORY OVERLOAD\u003c\/li\u003e\n  \u003cli\u003eRadius Arm Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable Alignment Cam Allows Caster Adjustment\u003c\/li\u003e\n  \u003cli\u003eUnsurpassed Strength And Performance\u003c\/li\u003e\n  \u003cli\u003ePatent Pending Radius Arms\u003c\/li\u003e\n  \u003cli\u003eFully Tubular Structure\u003c\/li\u003e\n  \u003cli\u003eDimple Die Side Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" RAD ARM SYS W\/COI\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916586041534,"sku":"T14.588229G","price":2524.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/456267422ad2fad60e1acd3ea8da00f8_5e052a2e-8dc6-4d23-a4d7-75c7aed5ff5b.jpg?v=1783214957"},{"product_id":"fabtech-08-15-ford-f250f350-4wd-4in-4link-sys-wcoils-dlss-shks-588525g-t14","title":"Fabtech 08-15 Ford F250\/F350 4WD 4in 4Link Sys w\/Coils \u0026 Dlss Shks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2212DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 08-15 Ford F250\/F350 4WD 4in 4Link Sys w\/Coils \u0026amp; Dlss Shks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003e4 Link Lift System; 4 in. Lift; w\/Dirt Logic Shocks;\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K2212DL 4\" 4 LINK FORD F2\/350\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e4 Link Lift System\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916586107070,"sku":"T14.588525G","price":4025.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/d64478aad3eb232682271fc38e51be11_e66be87e-6020-4738-a13a-2288d908c918.jpg?v=1783214958"},{"product_id":"fabtech-11-13-ford-f450550-4wd-10-lug-6in-rad-arm-sys-wcoils-perf-shks-588465g-t14","title":"Fabtech 11-13 Ford F450\/550 4WD 10 Lug 6in Rad Arm Sys w\/Coils \u0026 Perf Shks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2156\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6'' replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block \u0026amp; U-bolt kit.\u003c\/li\u003e\n  \u003cli\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block \u0026amp; U-bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eF450: TIRE SIZE - 285\/75R18 Wheel - 18XOEM W\/OEM\" BS W\/OEM DUALLY Wheels; F550: TIRE SIZE - 285\/75R19.5 Wheel - 19.5XOEM W\/OEM\" BS W\/OEM DUALLY Wheels; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-13 Ford F450\/550 4WD 10 Lug 6in Rad Arm Sys w\/Coils \u0026amp; Perf Shks\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COI\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; PERF SHKS 2011-13 FORD F450\/550 4WD 10 LUG.\u003c\/li\u003e\n  \u003cli\u003eRadius Arm Lift System; w\/Performance Shocks; 6 in. Lift;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; PERF SHKS 2011-13 FORD F450\/550 4WD 10 LUG\u003c\/li\u003e\n  \u003cli\u003eRadius Arm Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable Alignment Cam Allows Caster Adjustment\u003c\/li\u003e\n  \u003cli\u003eUnsurpassed Strength And Performance\u003c\/li\u003e\n  \u003cli\u003ePatent Pending Radius Arms\u003c\/li\u003e\n  \u003cli\u003eFully Tubular Structure\u003c\/li\u003e\n  \u003cli\u003eDimple Die Side Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" RAD ARM SYS W\/COI\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916586238142,"sku":"T14.588465G","price":2718.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/f2424fcecca2db5c6abfbef9101f269b_cd94d188-e8e4-4f3f-9296-9cbc7403fe6f.jpg?v=1783214960"},{"product_id":"fabtech-05-07-ford-f250-4wd-wo-factory-overload-6in-4link-sys-wcoils-stealth-588246g-t14","title":"Fabtech 05-07 Ford F250 4WD w\/o Factory Overload 6in 4Link Sys w\/Coils \u0026 Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2013M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAt the top of our Super Duty line is our famous 4 Link System that provides unsurpassed articulation and Wheel travel. Large 2'' OD heavy wall links feature race style 1'' Uniballs for superior strength. Thick 1\/4'' steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system includes our replacement Coil Springs. The system also includes Billet Sway bar links, Trac Bar relocation bracket, Pitman Arm and more. Rear lift is a block \u0026amp; u-bolt kit.\u003c\/li\u003e\n  \u003cli\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e4 Link Lift System; w\/Stealth Monotube Shocks; 6 in. Lift; w\/o Factory Overload;\u003c\/li\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/COILS \u0026amp; STEALTH 05-07 FORD F250 4WD W\/O FACTORY OVERLOAD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 05-07 Ford F250 4WD w\/o Factory Overload 6in 4Link Sys w\/Coils \u0026amp; Stealth\u003c\/li\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/COILS\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/COILS \u0026amp; STEALTH 05-07 FORD F250 4WD W\/O FACTORY OVERLOAD\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" 4LINK SYS W\/COILS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916586401982,"sku":"T14.588246G","price":3143.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/262b06ce373b1d46f284cc6912499e34_8721d4de-e029-4b4f-841e-86d48315c20a.jpg?v=1783214964"},{"product_id":"fabtech-2018-ford-f450f550-4wd-diesel-6in-rad-arm-sys-wcoils-stealth-588624g-t14","title":"Fabtech 2018 Ford F450\/F550 4WD Diesel 6in Rad Arm Sys w\/Coils \u0026 Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2304M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech's 6 in. Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understand of each these components please see below.\u003c\/li\u003e\n  \u003cli\u003eFabtech's 6in Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. Includes front and rear Stealth Shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 37\/12.50R17 Wheel - 17X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/12.50R18 Wheel - 18X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/13.50R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 2018 Ford F450\/F550 4WD Diesel 6in Rad Arm Sys w\/Coils \u0026amp; Stealth\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COI\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; STEALTH 2018 FORD F450\/F550 4WD DIESEL.\u003c\/li\u003e\n  \u003cli\u003eRadius Arm System; 6 In. Lift; Incl. Coils And Stealth Shocks;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; STEALTH 2018 FORD F450\/F550 4WD DIESEL\u003c\/li\u003e\n  \u003cli\u003eRadius Arm System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech Replacement Radius Arms\u003c\/li\u003e\n  \u003cli\u003eTrac Bar Relocation Bracket\u003c\/li\u003e\n  \u003cli\u003eFabtech Front Coil Springs\u003c\/li\u003e\n  \u003cli\u003eRear Block And U-Bolt Kit\u003c\/li\u003e\n  \u003cli\u003eSway Bar Drop Brackets\u003c\/li\u003e\n  \u003cli\u003ePitman Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" RAD ARM SYS W\/COI\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916586827966,"sku":"T14.588624G","price":2893.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/18b98a418401391a1dd21d4c668d3f86_d1c4a738-c528-4f63-b8ef-444943368960.jpg?v=1783214965"},{"product_id":"spc-performance-toyota-tacoma-upper-control-arm-pair-875107-t14","title":"SPC Performance Toyota Tacoma Upper Control Arm (PAIR)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25440 or #25435 depending on year. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire forward to maximize clearance for 33’s without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster 0.00° to +4.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the 2nd \u0026amp; 3rd Generation Tacoma with forged steel connstruction, sealed modern architecture ball joints, and xAxis™ seald flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e2ND \u0026amp; 3RD GEN TACOMA ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance Toyota Tacoma Upper Control Arm (PAIR)\u003c\/li\u003e\n  \u003cli\u003eAdj. Control Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35470 ADJ. UPPER CONTROL ARMS (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916586926270,"sku":"T14.875107","price":799.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/e7e30b4a6a2c160eca62679ddc433bd7L_6cd74574-483c-4bdf-af87-282637b7342c.jpg?v=1783214967"},{"product_id":"fabtech-11-13-ford-f450550-4wd-10-lug-6in-basic-sys-wperf-shks-588462g-t14","title":"Fabtech 11-13 Ford F450\/550 4WD 10 Lug 6in Basic Sys w\/Perf Shks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2155\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eAs a popular alternative to our Radius Arm and 4 Link System this Basic Drop Bracket system is designed for the budget minded enthusiast. Application utilizes the stock radius arm. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, rear Blocks and U- bolt kit.\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eF450: TIRE SIZE - 285\/75R18 Wheel - 18XOEM W\/OEM\" BS W\/OEM DUALLY Wheels; F550: TIRE SIZE - 285\/75R19.5 Wheel - 19.5XOEM W\/OEM\" BS W\/OEM DUALLY Wheels; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-13 Ford F450\/550 4WD 10 Lug 6in Basic Sys w\/Perf Shks\u003c\/li\u003e\n  \u003cli\u003e6\" BASIC SYS W\/PERF\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic Lift System w\/Shocks; w\/Performance Shocks; 6 in. Lift;\u003c\/li\u003e\n  \u003cli\u003e6\" BASIC SYS W\/PERF SHKS 2011-13 FORD F450\/550 4WD 10 LUG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" BASIC SYS W\/PERF SHKS 2011-13 FORD F450\/550 4WD 10 LUG\u003c\/li\u003e\n  \u003cli\u003eBasic Lift System w\/Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eDesigned For The Budget Minded Enthusiast\u003c\/li\u003e\n  \u003cli\u003eUtilizes The Stock Radius Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" BASIC SYS W\/PERF\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916586959038,"sku":"T14.588462G","price":2025.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/d2b839be2932cf7630301294a9f9a576_de72ddff-538f-4998-8b32-60f035196cbc.jpg?v=1783214968"},{"product_id":"fabtech-11-16-ford-f250f350-4wd-4in-rad-arm-sys-w40-225-589989g-t14","title":"Fabtech 11-16 Ford F250\/F350 4WD 4in Rad Arm Sys w\/4.0 \u0026 2.25","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2223DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech's 4 in. Radius Arm system with the Dirt Logic 4.0 Coilover conversion has been built for the Ford Super Duty to handle the on and offroad demands of the truck enthusiast. This Radius Arm system is a heavy duty upgrade to the factory suspension and will provide additional strength to the vehicle. The heart of this quality system is Fabtech's legendary tubular Radius Arms. The design of these arms comes from Fabtech's racing experience and are built with a tubular structure reinforced by dimple die side plates and heavy gusseting for rugged offroad use. They are superior in strength to the stock stamped arms. A heavy duty Track Bar relocation bracket centers the Super Duty axle under the vehicle and allows for full lock steering of 12.50 wide tires on 5 in. BS wheels. The front suspension receives the finest shock upgrade on the market with the Dirt Logic 4.0 Coilover conversion. It will provide outstanding damping capacity offroad with a quality on road ride. This Coilover bolts in place of the factory coil spring without removal of the coil spring bucket. The Dirt Logic is constructed with a stainless steel body for maximum corrosion resistance. It comes with a giant 4 in. diameter aluminum remote reservoir that mounts horizontally above the Coilover to allow for full compression travel with oversized tires. The rear suspension receives a 5 in. lift block, extended bump stop brackets and Dirt Logic 2.25 shocks for a balanced ride quality. This 4 in. Radius Arm system with the Dirt Logic 4.0 Coilovers is the ultimate suspension system for Super Duty owners that want to turn heads and tackle the toughest offroad terrain. System includes a free 5 year 60,000 mile powertrain warranty. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understanding of each these components, please see below.\u003c\/li\u003e\n  \u003cli\u003eFabtech's 4in Radius Arm system with the Dirt Logic 4.0 Coilover conversion has been built for the Ford Super Duty to handle the on and offroad demands of the truck enthusiast. This Radius Arm system is a heavy duty upgrade to the factory suspension and will provide additional strength to the vehicle. The heart of this quality system is Fabtech's legendary tubular Radius Arms. The design of these arms comes from Fabtech's racing experience and are built with a tubular structure reinforced by dimple die side plates and heavy gusseting for rugged offroad use. They are superior in strength to the stock stamped arms. A heavy duty Track Bar relocation bracket centers the Super Duty axle under the vehicle and allows for full lock steering of 12.50 wide tires on 5in BS Wheels. The front suspension receives the finest shock upgrade on the market with the Dirt Logic 4.0 Coilover conversion. It will provide outstanding damping capacity offroad with a quality on road ride. This Coilover bolts in place of the factory coil spring without removal of the coil spring bucket. The Dirt Logic is constructed with a stainless steel body for maximum corrosion resistance. It comes with a giant 4in diameter aluminum remote reservoir that mounts horizontally above the Coilover to allow for full compression travel with oversized tires. The rear suspension receives a 5in lift block, extended bump stop brackets and Dirt Logic 2.25 shocks for a balanced ride quality. This 4in Radius Arm system with the Dirt Logic 4.0 Coilovers is the ultimate suspension system for Super Duty owners that want to turn heads and tackle the toughest offroad terrain. System includes a free 5 year 60,000 mile powertrain warranty. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understanding of each these components, please see below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 35\/12.50R20 Wheel - 20X10 W\/5\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.; 42. WILL NOT FIT GAS MOTORS.; 16VEHICLES EQUIPPED WITH 2 PIECE DRIVESHAFT REQUIRE FTS419.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-16 Ford F250\/F350 4WD 4in Rad Arm Sys w\/4.0 \u0026amp; 2.25\u003c\/li\u003e\n  \u003cli\u003e4\" RAD ARM SYS W\/ 4.\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e4\" RAD ARM SYS W\/ 4.0 \u0026amp; 2.25 11-16 FORD F250\/F350 4WD.\u003c\/li\u003e\n  \u003cli\u003eRadius Arm Lift System; 4 in.;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e4\" RAD ARM SYS W\/ 4.0 \u0026amp; 2.25 11-16 FORD F250\/F350 4WD\u003c\/li\u003e\n  \u003cli\u003eRadius Arm Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable Alignment Cam Allows Caster Adjustment\u003c\/li\u003e\n  \u003cli\u003eUnsurpassed Strength And Performance\u003c\/li\u003e\n  \u003cli\u003ePatent Pending Radius Arms\u003c\/li\u003e\n  \u003cli\u003eFully Tubular Structure\u003c\/li\u003e\n  \u003cli\u003eDimple Die Side Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-4\" RAD ARM SYS W\/ 4.\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916587024574,"sku":"T14.589989G","price":5612.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/842a4b1b2080c9e9df6c82d60cb2fb5d.jpg?v=1783214969"},{"product_id":"fabtech-08-10-ford-f250f350-4wd-8in-4link-sys-wdlss-40-co-rr-dlss-588334g-t14","title":"Fabtech 08-10 Ford F250\/F350 4WD 8in 4Link Sys w\/Dlss 4.0 C\/O\u0026 Rr Dlss","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2068DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAt the top of our Super Duty line is our famous 4 Link System that provides unsurpassed articulation and Wheel travel. Large 2'' diameter heavy wall links feature race style 1'' Uniballs for superior strength. Thick 1\/4'' steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system includes our Dirt Logic 4.0 Stainless Steel Coilover Shock convesion and rear 2.25 Dirt Logic Stainless Steel shocks. The system also includes Sway Bar drops, Trac Bar relocation bracket, Pitman Arm, U-bolt kit, and replacement rear Leaf Springs.\u003c\/li\u003e\n  \u003cli\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 37\/13.50R20 Wheel - 20X10 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 355\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.; 29. REAR SPRINGS MAY REDUCE LOAD CARRYING CAPACITY.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 08-10 Ford F250\/F350 4WD 8in 4Link Sys w\/Dlss 4.0 C\/O\u0026amp; Rr Dlss\u003c\/li\u003e\n  \u003cli\u003e8\" 4LINK SYS W\/DLSS\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e8\" 4LINK SYS W\/DLSS 4.0 C\/O\u0026amp; RR DLSS 08-10 FORD F250\/F350 4WD.\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System; w\/DLSS Shocks; 8 in. Lift;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e8\" 4LINK SYS W\/DLSS 4.0 C\/O\u0026amp; RR DLSS 08-10 FORD F250\/F350 4WD\u003c\/li\u003e\n  \u003cli\u003e4 Link Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-8\" 4LINK SYS W\/DLSS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916587385022,"sku":"T14.588334G","price":7801.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/676d7e2988d0c3115f2851c4ac6dea1f_0dc57f6c-dc9b-4b7f-b99b-98e83720d141.jpg?v=1783214970"},{"product_id":"spc-performance-04-17-ford-f-150-front-adjustable-upper-control-arms-887619-t14","title":"SPC Performance 04-17 Ford F-150 Front Adjustable Upper Control Arms","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #86250 or #86252. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear \u0026amp; allows the tire to move forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.0° \/ Caster 0° to +4.0\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford F-150 with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 04-17 Ford F-150 Front Adjustable Upper Control Arms\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD F-150 ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35680 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916587483326,"sku":"T14.887619","price":849.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/9382786ba7cbb6423678ee781ec71eefL.jpg?v=1783214972"},{"product_id":"spc-performance-04-20-ford-f-150-lowered-front-adjustable-upper-control-arms-887608-t14","title":"SPC Performance 04-20 Ford F-150 Lowered Front Adjustable Upper Control Arms","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #86250 or #86252. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range designed for specifically lowered F-150's. Combined with OE adjusters arm corrects alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire to maximize clearances\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.0° \/ Caster -1.0° to +3.0 °\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eForged steel adjustable front upper control arms for lowered Ford F-150's with, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 04-20 Ford F-150 Lowered Front Adjustable Upper Control Arms\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eLOWERED FORD F-150 ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35675 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916587516094,"sku":"T14.887608","price":849.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/3bbefb4e9139ae356b207f83996198a0L.jpg?v=1783214973"},{"product_id":"fabtech-18-ford-f450f550-4wd-diesel-6in-rad-arm-sys-wcoils-perf-shks-588622g-t14","title":"Fabtech 18 Ford F450\/F550 4WD Diesel 6in Rad Arm Sys w\/Coils \u0026 Perf Shks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2304\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech's 6 in. Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understand of each these components please see below.\u003c\/li\u003e\n  \u003cli\u003eFabtech's 6in Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. Includes front and rear Performance Shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 37\/12.50R17 Wheel - 17X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/12.50R18 Wheel - 18X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/13.50R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 18 Ford F450\/F550 4WD Diesel 6in Rad Arm Sys w\/Coils \u0026amp; Perf Shks\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COI\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; PERF SHKS 2018 FORD F450\/F550 4WD DIESEL.\u003c\/li\u003e\n  \u003cli\u003eRadius Arm System; 6 in. Lift; Incl. Coils And Performance Shocks;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; PERF SHKS 2018 FORD F450\/F550 4WD DIESEL\u003c\/li\u003e\n  \u003cli\u003eRadius Arm System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech Replacement Radius Arms\u003c\/li\u003e\n  \u003cli\u003eTrac Bar Relocation Bracket\u003c\/li\u003e\n  \u003cli\u003eFabtech Front Coil Springs\u003c\/li\u003e\n  \u003cli\u003eRear Block And U-Bolt Kit\u003c\/li\u003e\n  \u003cli\u003eSway Bar Drop Brackets\u003c\/li\u003e\n  \u003cli\u003ePitman Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" RAD ARM SYS W\/COI\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916587581630,"sku":"T14.588622G","price":2726.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/f86d87fd5e517a06d4962b2d1f2a69fb_f787e4e1-87ac-42d2-a9e6-cf194964aecb.jpg?v=1783214974"},{"product_id":"fabtech-05-07-ford-f350-4wd-6in-basic-sys-wperf-shks-588221g-t14","title":"Fabtech 05-07 Ford F350 4WD 6in Basic Sys w\/Perf Shks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K20102\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis system provides 6'' of lift to clear 315\/70R17 tires for the entry level enthusiast. The system utilizes the factory Radius Arms with new heavy duty frame brackets for the budget minded offroader. Lift height is accomplished with Performance Coil Springs in the front and a Block \u0026amp; U-bolt kit in the rear. Also include are a Trac Bar relocation bracket, Pitman Arm and Sway Bar brackets.\u003c\/li\u003e\n  \u003cli\u003eThis system provides 6 of lift to clear 315\/70R17 tires for the entry level enthusiast. The system utilizes the factory Radius Arms with new heavy duty frame brackets for the budget minded offroader. Lift height is accomplished with Performance Coil Springs in the front and a Block \u0026amp; U-bolt kit in the rear. Also include are a Trac Bar relocation bracket, Pitman Arm and Sway Bar brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic Lift System w\/Shocks; w\/Performance Shocks; 6 in. Lift;\u003c\/li\u003e\n  \u003cli\u003e6\" BASIC SYS W\/PERF SHKS 05-07 FORD F350 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 05-07 Ford F350 4WD 6in Basic Sys w\/Perf Shks\u003c\/li\u003e\n  \u003cli\u003e6\" BASIC SYS W\/PERF\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eDesigned For The Budget Minded Enthusiast\u003c\/li\u003e\n  \u003cli\u003eUtilizes The Stock Radius Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" BASIC SYS W\/PERF SHKS 05-07 FORD F350 4WD\u003c\/li\u003e\n  \u003cli\u003eBasic Lift System w\/Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" BASIC SYS W\/PERF\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916587679934,"sku":"T14.588221G","price":1443.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/6c4e3adde7fb540483031cef664c6a21_b6d8654d-0810-4c4b-92c8-2d1716ab73fd.jpg?v=1783214975"},{"product_id":"spc-performance-08-toyota-landcruiser-rear-lower-control-arms-pair-4364311-t14","title":"SPC Performance 08+ Toyota Landcruiser Rear Lower Control Arms (Pair)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 200 Series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with an xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. Need caster\/camber adjustment or increased articulation on the front? Use our 25465 fully adjustable upper control arms allowing for full travel for your off road needs. California Residents WARNING\u003c\/li\u003e\n  \u003cli\u003eThis pair of rear lower control arms are direct replacements for weak or bent factory units on the 200 Series Landcruiser. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with an xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. Need caster\/camber adjustment or increased articulation on the front? Use our 25465 fully adjustable upper control arms allowing for full travel for your off road needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 08+ Toyota Landcruiser Rear Lower Control Arms (Pair)\u003c\/li\u003e\n  \u003cli\u003eCONTROL ARM PR\u003c\/li\u003e\n  \u003cli\u003eCNTRL ARM PR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreasesarticulationwith xAxis sealed flex joint.\u003c\/li\u003e\n  \u003cli\u003e3\/16' wall DOM steel tube construction\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OE arms\u003c\/li\u003e\n  \u003cli\u003e2x stronger than the OEM arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 25965 LOWER CONTROL ARMS PAIR\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTOYOTA LOWER CONTROL ARMS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Control Arm\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916587778238,"sku":"T14.4364311","price":356.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/9c187ca8eb533684ce08428e3902f9eb_f15e9f58-5cb8-45cb-a691-197138507c6d.jpg?v=1783214976"},{"product_id":"fabtech-05-07-ford-f350-4wd-6in-basic-sys-wstealth-588223g-t14","title":"Fabtech 05-07 Ford F350 4WD 6in Basic Sys w\/Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K20102M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/li\u003e\n  \u003cli\u003eThis system provides 6'' of lift to clear 315\/70R17 tires for the entry level enthusiast. The system utilizes the factory Radius Arms with new heavy duty frame brackets for the budget minded offroader. Lift height is accomplished with Performance Coil Springs in the front and a Block \u0026amp; U-bolt kit in the rear. Also include are a Trac Bar relocation bracket, Pitman Arm and Sway Bar brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic Lift System w\/Shocks; w\/Stealth Monotube Shocks; 6 in. Lift;\u003c\/li\u003e\n  \u003cli\u003e6\" BASIC SYS W\/STEALTH 05-07 FORD F350 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 05-07 Ford F350 4WD 6in Basic Sys w\/Stealth\u003c\/li\u003e\n  \u003cli\u003e6\" BASIC SYS W\/STEAL\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eDesigned For The Budget Minded Enthusiast\u003c\/li\u003e\n  \u003cli\u003eUtilizes The Stock Radius Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" BASIC SYS W\/STEALTH 05-07 FORD F350 4WD\u003c\/li\u003e\n  \u003cli\u003eBasic Lift System w\/Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" BASIC SYS W\/STEAL\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916587876542,"sku":"T14.588223G","price":1610.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/a042a25c81583517db531d4b63726390.jpg?v=1783214978"},{"product_id":"fabtech-08-16-ford-f250-4wd-wo-factory-overload-8in-basic-sys-wstealth-588402g-t14","title":"Fabtech 08-16 Ford F250 4WD w\/o Factory Overload 8in Basic Sys w\/Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2121M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eBasic Lift System w\/Shocks; w\/Stealth Monotube Shocks; 8 in. Lift; w\/o Factory Overload;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 08-16 Ford F250 4WD w\/o Factory Overload 8in Basic Sys w\/Stealth\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eDesigned For The Budget Minded Enthusiast\u003c\/li\u003e\n  \u003cli\u003eUtilizes The Stock Radius Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eBasic Lift System w\/Shocks\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588040382,"sku":"T14.588402G","price":1766.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/455b68de5f50ddda2adce0d85fd1887f_1cc3dd28-7fab-433b-b098-357e6b641b08.jpg?v=1783214982"},{"product_id":"fabtech-18-ford-f450f550-4wd-diesel-6in-rad-arm-sys-w40-225dl-588625g-t14","title":"Fabtech 18 Ford F450\/F550 4WD Diesel 6in Rad Arm Sys w\/4.0 \u0026 2.25Dl","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2305DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech's 6in Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. Fabtech Replacement Radius Arms. Dirt Logic 4.0 Resi Coilovers. Trac Bar Relocation Bracket. Sway Bar Drop Brackets. Pitman Arm. Rear Block \u0026amp; U-bolt Kit. Rear Dirt Logic 2.25 shocks.\u003c\/li\u003e\n  \u003cli\u003eFabtech's 6 in. Radius Arm system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understand of each these components please see below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 37\/12.50R17 Wheel - 17X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/12.50R18 Wheel - 18X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/13.50R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRadius Arm System; 6 In. Lift; Incl. Front 4.0 Dirt Logic Shocks And Rear 2.25 Dirt Logic Shocks;\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/ 4.0 \u0026amp; 2.25DL 2018 FORD F450\/F550 4WD DIESEL.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 18 Ford F450\/F550 4WD Diesel 6in Rad Arm Sys w\/4.0 \u0026amp; 2.25Dl\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/ 4.\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/ 4.0 \u0026amp; 2.25DL 2018 FORD F450\/F550 4WD DIESEL\u003c\/li\u003e\n  \u003cli\u003eRadius Arm System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech Replacement Radius Arms\u003c\/li\u003e\n  \u003cli\u003eDirt Logic 4.0 Resi Coilovers\u003c\/li\u003e\n  \u003cli\u003eTrac Bar Relocation Bracket\u003c\/li\u003e\n  \u003cli\u003eRear Block And U-Bolt Kit\u003c\/li\u003e\n  \u003cli\u003eSway Bar Drop Brackets\u003c\/li\u003e\n  \u003cli\u003ePitman Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" RAD ARM SYS W\/ 4.\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588105918,"sku":"T14.588625G","price":5927.01,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/56ddce99fb4d463b4810d2eaa62b3670_247595bd-4f1e-4764-845d-d75005560735.jpg?v=1783214982"},{"product_id":"fabtech-18-ford-f450f550-4wd-diesel-6in-4link-sys-wcoils-stealth-588628g-t14","title":"Fabtech 18 Ford F450\/F550 4WD Diesel 6in 4Link Sys w\/Coils \u0026 Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2306M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech's 6\" 4 Link Conversion system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This system comes with everything needed to convert to a 4 Link front suspension. The system will provide less caster change throughout the travel range which benefits on road driving. Offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Fabtech's 4 Link System has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly design suspension geometry is the pinnacle of Super Duty suspension systems. Each Fabtech component is expertly built in house. Fabtech Heavy Duty Link Arms. Fabtech Front Coil Springs. Trac Bar Relocation Bracket. Sway Bar Drop Brackets. Pitman Arm. Rear Block \u0026amp; U-bolt Kit. Includes front and rear Stealth shocks.\u003c\/li\u003e\n  \u003cli\u003eFabtech's 6 in. 4 Link Conversion system for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle's suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech. This system comes with everything needed to convert to a 4 Link front suspension. The system will provide less caster change throughout the travel range which benefits on road driving. Offroad the 4 Link system will provide more articulation than a Radius Arm for increased terrain traversing at all speeds. Fabtech's 4 Link System has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly design suspension geometry is the pinnacle of Super Duty suspension systems. Each Fabtech component is expertly built in house and has specific design features and benefits as listed below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 37\/12.50R17 Wheel - 17X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/12.50R18 Wheel - 18X9 W\/4 3\/4\" BS W\/MINOR TRIMMING; TIRE SIZE - 37\/13.50R20 Wheel - 20X9 W\/5\" BS W\/MINOR TRIMMING; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 18 Ford F450\/F550 4WD Diesel 6in 4Link Sys w\/Coils \u0026amp; Stealth\u003c\/li\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/COILS\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/COILS \u0026amp; STEALTH 2018 FORD F450\/F550 4WD DIESEL.\u003c\/li\u003e\n  \u003cli\u003e4 Link System; 6 In. Lift; Incl. Coils And Stealth Shocks;\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" 4LINK SYS W\/COILS \u0026amp; STEALTH 2018 FORD F450\/F550 4WD DIESEL\u003c\/li\u003e\n  \u003cli\u003e4 Link System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech Heavy Duty Link Arms\u003c\/li\u003e\n  \u003cli\u003eTrac Bar Relocation Bracket\u003c\/li\u003e\n  \u003cli\u003eFabtech Front Coil Springs\u003c\/li\u003e\n  \u003cli\u003eRear Block And U-Bolt Kit\u003c\/li\u003e\n  \u003cli\u003eSway Bar Drop Brackets\u003c\/li\u003e\n  \u003cli\u003ePitman Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" 4LINK SYS W\/COILS\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588138686,"sku":"T14.588628G","price":3433.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/1664071605f3b98749c18016e0f899ad_3d7eb5c6-943c-4378-853b-a991a130bec7.jpg?v=1783214983"},{"product_id":"spc-performance-2021-ford-bronco-sport-awd-2022-ford-maverick-awd-adjustable-rear-camber-arm-701547-t14","title":"SPC Performance 2021+ Ford Bronco Sport AWD \/ 2022+ Ford Maverick AWD Adjustable Rear Camber Arm","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eAdd rear camber adjustment to your Ford truck or SUV with this adjustable length control arm from SPC. An adjustment range of 3.0 will get your vehicle back to factory specifications ensuring proper tire wear, improved handling, and excellent ride quality. Each rear arm is equipped with bonded rubber bushings to maintain factory ride.\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 2021+ Ford Bronco Sport AWD \/ 2022+ Ford Maverick AWD Adjustable Rear Camber Arm\u003c\/li\u003e\n  \u003cli\u003eADJ. CAMBER ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOE style rubber bonded bushing maintain ride quality\u003c\/li\u003e\n  \u003cli\u003eLocks camber adjustment with double jam nut design\u003c\/li\u003e\n  \u003cli\u003eAdjusts camber plus or minus 3.0 degrees\u003c\/li\u003e\n  \u003cli\u003eHigh strength steel construction\u003c\/li\u003e\n  \u003cli\u003eRequires one per wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 67445 REAR ADJUSTABLE CAMBER ARM\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eADJUSTABLE CONTROL ARM\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Camber Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eADJ ARM EA\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588236990,"sku":"T14.701547","price":206.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/26327c7fef057af88c04c8759b98c613L_0bfbc671-dd4a-4c43-bba6-f2434afd15a4.jpg?v=1783214985"},{"product_id":"fabtech-11-16-ford-f250-4wd-10in-4link-sys-wdlss-40-co-rr-dlss-588459g-t14","title":"Fabtech 11-16 Ford F250 4WD 10in 4Link Sys w\/Dlss 4.0 C\/O \u0026 Rr Dlss","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2152DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-16 Ford F250 4WD 10in 4Link Sys w\/Dlss 4.0 C\/O \u0026amp; Rr Dlss\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003e4 Link Lift System; w\/DLSS Shocks; 10 in. Lift;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K2152DL 10\" 4 LINK F250\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e4 Link Lift System\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588335294,"sku":"T14.588459G","price":7918.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/bc62240ebfeaf9cf30bc3c8e56012014_f12d07e2-63a6-4d5a-bda0-d063461cf82d.jpg?v=1783214986"},{"product_id":"spc-performance-ford-ranger-front-upper-adjustable-arms-pr-894383-t14","title":"SPC Performance Ford Ranger Front Upper Adjustable Arms (PR)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driveability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods.  Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear \u0026amp; possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eChromoly tube and forged steel nose construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster -1.00° to +3.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance Ford Ranger Front Upper Adjustable Arms (PR)\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD RANGER ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35670 ADJ. UPPER CONTROL ARM (PR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588368062,"sku":"T14.894383","price":899.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/3e990a93d932a27974d02dd39810e727L_2574eaaa-a87d-4aea-a120-4530632a8cd3.jpg?v=1783214987"},{"product_id":"spc-performance-2021-up-ford-ranger-adjustable-upper-control-arms-pair-894382-t14","title":"SPC Performance 2021-Up Ford Ranger Adjustable Upper Control Arms - Pair","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driveability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods.  Use SPC #63020 to adjust thrust angle, replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear \u0026amp; possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eChromoly tube and forged steel nose construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster -1.00° to +3.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford Ranger with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 2021-Up Ford Ranger Adjustable Upper Control Arms - Pair\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD RANGER ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35665 ADJ. UPPER CONTROL ARM (PR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588499134,"sku":"T14.894382","price":899.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/2f95cc28c2070ac7b034c118ab324f06L_4ca2a879-5a32-4d3e-86a8-06593611afda.jpg?v=1783214988"},{"product_id":"spc-performance-2021-ford-bronco-adjustable-upper-control-arms-894384-t14","title":"SPC Performance 2021+ Ford Bronco Adjustable Upper Control Arms","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driveability. The patented ball joint design gives more adjustability than any other arm on the market, use it in combination with cam adjusters on the lower arm to maximize tire clearance and minimize the need for frame mods.  Replace OE lower cams with #86220. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved driveability and reduced tire wear \u0026amp; possible to move the tire forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eChromoly tube and billet machined steel nose construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster -1.00° to +3.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford Bronco with chromoly tube steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 2021+ Ford Bronco Adjustable Upper Control Arms\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eFORD BRONCO ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35690 ADJ. UPPER CONTROL ARM (PR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916588564670,"sku":"T14.894384","price":849.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/eeb3d5b761e63418961b334d67d4f7e9L_eb129f06-689a-4958-bde3-0eb8fabaab53.jpg?v=1783214989"},{"product_id":"fabtech-05-07-ford-f350-4wd-6in-rad-arm-sys-wcoils-stealth-588232g-t14","title":"Fabtech 05-07 Ford F350 4WD 6in Rad Arm Sys w\/Coils \u0026 Stealth","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K20112M\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. This system includes replacement Coil Springs in the front and a block \u0026amp; u-bolt kit in the rear. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops and more.\u003c\/li\u003e\n  \u003cli\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block \u0026amp; U-bolt kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eTIRE SIZE - 315\/70R17 Wheel - 17X8 W\/4 1\/2\" BS W\/MINOR TRIMMING; TIRE SIZE - 325\/65R18 Wheel - 18X9.5 W\/4 3\/4\" BS W\/MINOR TRIMMING; NON DUALLY MODELS ONLY.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRadius Arm Lift System; w\/Stealth Monotube Shocks; 6 in. Lift;\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; STEALTH 05-07 FORD F350 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 05-07 Ford F350 4WD 6in Rad Arm Sys w\/Coils \u0026amp; Stealth\u003c\/li\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COI\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" RAD ARM SYS W\/COILS \u0026amp; STEALTH 05-07 FORD F350 4WD\u003c\/li\u003e\n  \u003cli\u003eRadius Arm Lift System\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable Alignment Cam Allows Caster Adjustment\u003c\/li\u003e\n  \u003cli\u003eUnsurpassed Strength And Performance\u003c\/li\u003e\n  \u003cli\u003ePatent Pending Radius Arms\u003c\/li\u003e\n  \u003cli\u003eFully Tubular Structure\u003c\/li\u003e\n  \u003cli\u003eDimple Die Side Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFabtech-6\" RAD ARM SYS W\/COI\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588728510,"sku":"T14.588232G","price":2524.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/456267422ad2fad60e1acd3ea8da00f8_263a8763-729f-4be9-8172-6869df997040.jpg?v=1783214992"},{"product_id":"fabtech-11-16-ford-f250-4wd-wfactory-overload-8in-rad-arm-sys-wdlss-40-co-rr-dlss-588447g-t14","title":"Fabtech 11-16 Ford F250 4WD w\/Factory Overload 8in Rad Arm Sys w\/Dlss 4.0 C\/O\u0026 Rr Dlss","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2140DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block \u0026amp; U-bolt kit.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-16 Ford F250 4WD w\/Factory Overload 8in Rad Arm Sys w\/Dlss 4.0 C\/O\u0026amp; Rr Dlss\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eRadius Arm Lift System; w\/DLSS Shocks; 8 in. Lift; w\/Factory Overload;\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable Alignment Cam Allows Caster Adjustment\u003c\/li\u003e\n  \u003cli\u003eUnsurpassed Strength And Performance\u003c\/li\u003e\n  \u003cli\u003ePatent Pending Radius Arms\u003c\/li\u003e\n  \u003cli\u003eFully Tubular Structure\u003c\/li\u003e\n  \u003cli\u003eDimple Die Side Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K2140DL 10\" RADIUS ARM F250\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eRadius Arm Lift System\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588859582,"sku":"T14.588447G","price":6714.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/20b415f072897ff2252954d0b7f8d2c2_cc74622e-07d8-4f0e-a87f-6d3a472a8341.jpg?v=1783214994"},{"product_id":"fabtech-11-19-gm-2500hd-2wd4wd-4in-basic-sys-wdlss-shks-588188g-t14","title":"Fabtech 11-19 GM 2500HD 2WD\/4WD 4in Basic Sys w\/Dlss Shks","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K1121DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFabtechs new 4 crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4 system features high arched lower control arm crossmembers constructed of 1\/4 thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eCrossmember Lift System; 4 in. Lift; w\/Dirt Logic 2.25 Shocks;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-19 GM 2500HD 2WD\/4WD 4in Basic Sys w\/Dlss Shks\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4 in. Thick Lower Control Arms\u003c\/li\u003e\n  \u003cli\u003eHeavy Duty Torsion Drop Brackets\u003c\/li\u003e\n  \u003cli\u003eRetains Proper CV Angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eCrossmember Lift System\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916588990654,"sku":"T14.588188G","price":3208.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/f33d72a74acf1808e64502c7dd583c02_a631b7a5-8914-46d7-b8e8-0056c09d99b5.jpg?v=1783214996"},{"product_id":"fabtech-11-16-ford-f350-4wd-6in-4link-sys-w40-rr-225-588608g-t14","title":"Fabtech 11-16 Ford F350 4WD 6in 4Link Sys w\/4.0 R\/R \u0026 2.25","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2288DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFor the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1\/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003e4 Link Lift System; For 6 in. Lift; Incl. Front 4.0 DL Resi Coilovers\/Rear DL 2.25 Shocks;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-16 Ford F350 4WD 6in 4Link Sys w\/4.0 R\/R \u0026amp; 2.25\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides Unsurpassed Articulation And Wheel Travel\u003c\/li\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eRace Style Uniball For Superior Strength\u003c\/li\u003e\n  \u003cli\u003eUltimate In Suspension Performance\u003c\/li\u003e\n  \u003cli\u003eNo Cutting Or Welding\u003c\/li\u003e\n  \u003cli\u003eHeavy Wall Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K2288DL 6\" 4 LINK FORD F350\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e4 Link Lift System\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916589088958,"sku":"T14.588608G","price":6115.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/62b3f45556655cc9dbbde1816992022c_e4c97185-a1c7-4c46-afc7-43f8d0ad5935.jpg?v=1783214998"},{"product_id":"spc-performance-96-02-toyota-4runner-95-04-toyota-tacoma-adjustable-upper-control-arms-pair-896531-t14","title":"SPC Performance 96-02 Toyota 4Runner \/ 95-04 Toyota Tacoma Adjustable Upper Control Arms (Pair)","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25430. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range combines with OE adjusters to correct alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire forward to maximize clearance for larger tires without frame or fender mods\u003c\/li\u003e\n  \u003cli\u003eBall joint's one piece polymer race with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics.\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster 0.00° to +4.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for Toyota 1st Gen Tacoma and 3rd Gen 4Runner with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 96-02 Toyota 4Runner \/ 95-04 Toyota Tacoma Adjustable Upper Control Arms (Pair)\u003c\/li\u003e\n  \u003cli\u003eAdj. Control Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eTOYOTA ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35460 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916589121726,"sku":"T14.896531","price":899.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/bb7c6439abce3b0140c6edbc630c1347L_8a7abf8e-7f1d-478a-9e1f-2bfb2967a337.jpg?v=1783214998"},{"product_id":"fabtech-11-16-ford-f250-4wd-4in-rad-arm-sys-wdlss-40-co-rr-dlss-588511g-t14","title":"Fabtech 11-16 Ford F250 4WD 4in Rad Arm Sys w\/Dlss 4.0 C\/O\u0026 Rr Dlss","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K2204DL\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eOur patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block \u0026amp; U-bolt kit.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eRadius Arm Lift System; 4 in. Lift; w\/Dirt Logic 4.0 Coilovers; Rear Dirt Logic Shocks;\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 11-16 Ford F250 4WD 4in Rad Arm Sys w\/Dlss 4.0 C\/O\u0026amp; Rr Dlss\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable Alignment Cam Allows Caster Adjustment\u003c\/li\u003e\n  \u003cli\u003eUnsurpassed Strength And Performance\u003c\/li\u003e\n  \u003cli\u003ePatent Pending Radius Arms\u003c\/li\u003e\n  \u003cli\u003eFully Tubular Structure\u003c\/li\u003e\n  \u003cli\u003eDimple Die Side Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K2204DL 4\" RADIUS ARM F250\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eRadius Arm Lift System\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916589187262,"sku":"T14.588511G","price":6588.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/a6429895e8f1d3be382136a8862f5b6d_f6c7279f-3877-4c16-8a10-40aef92769d5.jpg?v=1783214999"},{"product_id":"fabtech-2015-toyota-tacoma-4wd2wd-6-lug-models-only-6in-basic-sys-588931g-t14","title":"Fabtech 2015 Toyota Tacoma 4WD\/2WD 6 Lug Models Only 6in Basic Sys","description":"\u003ch3\u003e\u003cstrong\u003eManufacturer Part # : K7034\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eFabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFabtech 2015 Toyota Tacoma 4WD\/2WD 6 Lug Models Only 6in Basic Sys\u003c\/li\u003e\n  \u003cli\u003eLftKt-Suspw\/Shock\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eBasic Lift System w\/Shocks; Rear for 6 in. Lift System;\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEverything You Will Need To Lift Your Vehicle\u003c\/li\u003e\n  \u003cli\u003eDesigned For The Budget Minded Enthusiast\u003c\/li\u003e\n  \u003cli\u003eUtilizes The Stock Radius Arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eFABTECH PN K7034 6\" TACOMA SYSTEM\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003eBasic Lift System w\/Shocks\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eSuspension Lift Kit\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":47916593807550,"sku":"T14.588931G","price":2540.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/8fa68ada5b2ae463f3fe2ac256f844f9.jpg?v=1783215005"},{"product_id":"spc-performance-21-ford-f-150-front-adj-upper-racing-control-arm-kit-887620-t14","title":"SPC Performance 21+ FORD F-150  Front Adj Upper Racing Control Arm Kit","description":"\u003ch2\u003eMarket Description\u003c\/h2\u003e\n\u003cp\u003eDesigned, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the spring bucket and a full 80° of articulation in the ball joint - more than any other offering available. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and drivability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #86250 or #86252. Sold as pairs. US Patent No. 7,513,514.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear \u0026amp; allows the tire to move forward to maximize clearance for larger tires without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.0° \/ Caster 0° to +4.0 °\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Extended\u003c\/h2\u003e\n\u003cp\u003eAdjustable front upper control arms for the Ford F-150 with forged steel construction, sealed modern architecture ball joints, and xAxis™ sealed flex joint joints in bonded rubber bushings\u003c\/p\u003e\n\n\u003ch2\u003eAssociated Comments\u003c\/h2\u003e\n\u003cp\u003eProduct appearance and features may vary in the market as design changes improvements and modifications are implemented.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Short\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSPC Performance 21+ FORD F-150  Front Adj Upper Racing Control Arm Kit\u003c\/li\u003e\n  \u003cli\u003eADJ. CONTROL ARM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Description - Long\u003c\/h2\u003e\n\u003cp\u003e21+ FORD F-150 ADJUSTABLE UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Invoice\u003c\/h2\u003e\n\u003cp\u003eSPC 35685 ADJ. UPPER CONTROL ARM (PAIR)\u003c\/p\u003e\n\n\u003ch2\u003eAAIA Part Type Description\u003c\/h2\u003e\n\u003cp\u003eAlignment Caster \/ Camber Control Arm\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description - Abbreviated\u003c\/h2\u003e\n\u003cp\u003eCONTROL ARMS\u003c\/p\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":47916593840318,"sku":"T14.887620","price":849.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/3456\/0446\/files\/571ef4a6ff91d61ae4ae0c4139ab5ec3L.jpg?v=1783215005"}],"url":"https:\/\/sbxoffroad.com\/collections\/suspension-lift-kits.oembed","provider":"SBX Off-Road","version":"1.0","type":"link"}