Turbo Outlet Adapter Hardware Kit Ford F-150 (2011-2020)

The OEM turbo-side studs are a known failure and problem point when working on this area. The stud only has two flats on the end and requires a specialized Ford OE tool or stud extractor to remove, which usually leaves the stud and threads damaged. There is also a high probability the studs will break during removal, as the quality of steel and machining does not suit this application.

PRL manufactures the stud from 303 stainless steel, adding corrosion and heat resistance. The 303 is an easy-to-machine stainless that guarantees quality threads and a long, reusable lifetime. The design also adds two hex-key portions—a 6mm on the head for stationary support while removing the nut from the downpipe, and a 15mm on the center portion for stud installation and extraction—making it much easier to remove and to apply proper torque specs with common tools.

Features

• Contains all components needed for install: 4 studs, 4 nuts, 2 gaskets, and anti-seize
• 303 stainless studs for corrosion and heat resistance
• Added hex-key portions for easy, reusable studs with common hand tools
• 6mm outer portion for stationary support when removing downpipe nuts
• 15mm center portion for install and extraction that won't strip
• Single-use anti-seize packet to prevent galvanic corrosion
• New gaskets for a perfect seal
• Fits 2011-2020 Ford F-150 and 2017-2020 Raptor 3.5L EcoBoost

What's in the Box

• 4x 303 stainless studs
• 4x nuts
• 2x gaskets
• 1x anti-seize packet